Features And Technical Specifications; Inserting/Replacing The Batteries - Dörr E-Protect AM360 Mode D'emploi

FEATURES AND TECHNICAL SPECIFICATIONS

• NRR 24 dB (Noise Reduction Rating)
• Ultra lightweight: 308 grams
• Folds compactly for transportation: 14,5x10 cm
• Water and dirt repellent, soft ear padding
• Individual volume control right/left
• Enhances ambient noise up to 9x
• Suppression of impulse noise as of 80 - 85 dB
• 2 x 2 wind resistant high frequency stereo microphones for 360° noise detection
• Energy source: 2x Micro AAA LR03 batteries (included )
NOMENCLATURE
Battery compartment AAA
Ear padding for fi rm protection

INSERTING/REPLACING THE BATTERIES

The battery compartments are located behind the inner padding of the earmuff . Insert 2x Micro AAA LR03 batteries according to
polarity +/-. In case of a drop of performance, disturbances such as upcoming noise, check the battery capacity and exchange them
if necessary.
USAGE
• Turn the lateral volume control to lowest position in order to activate the electronics. While the earmuff s electronics is active,
impulse noise as of 80 dB, e.g. a gun shot, will be suppressed.
• Regular ambient noise will be enhanced by 9 times. Adjust the desired volume by using the two lateral volume controls.
• The high frequency microphones, installed in both sides of earmuff s, allow 360° noise detection.
• When you do not use the earmuff s, switch both controls to position "Off ".
Adjustable padded head bracket
Extra hinge for best wearing comfort
Volume controls: red=right side/blue = left side
Wind resistant high frequency microphone
Sloped lower section for rifl emen
7