Technical Specifications - IVT 312208 Mode D'emploi

Charging by wall charging base:
1. Connect the charging adaptor with the charging base.
2. Connect the charging adaptor with the right supply voltage source (230 V AC or 12 V DC).
3. Place the lamp in the charging base.
Using the charging socket on the lamp:
1. Connect the charging adaptor with the charging socket of the lamp.
2. Connect the charging adaptor with the right supply voltage source (230 V AC or 12 V DC).
The lead-gel rechargeable battery of the work lamp may be charged approx. 300 – 400 times.
Use as replacement only rechargeable batteries of the same type.
Defective lead-gel batteries must be disposed as special waste.

TECHNICAL SPECIFICATIONS

Power source:
LED type:
Maximum LED power:
Maximum light flux
Color temperature
Light modes:
Maximum lighting range
Maximum runtime
Beam angle:
Lamp head moving angle:
Emergency light function:
Charging adaptor:
Maximum charge time:
Battery status indicator:
Deep discharge protection:
Over charge protection:
Protection class:
IP class:
Ambient temperature:
Material:
Color:
Dimensions:
Weight:
Part no.:
ENVIRONMENTAL PROTECTION NOTE
At the end of its useful life, this product must not be disposed of together with normal household waste,
but has to be dropped off at a collection centre for the recycling of electrical and electronic devices. This
is indicated by the symbol on the product, on the instruction manual or on the packaging.
The materials of which this product is made are recyclable pursuant to their labelling. With the reuse, the
recycling of the materials or other forms of scrap usage you are making an important contribution to the
protection of the environment.
Please ask your local administration office for the appropriate disposal centre.
Technical specifications subject to change. We assume no liability for typographical errors. V2_05/2017
© IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Phone: 0049 (0) 9622-719910, fax: 09622-7199120; info@ivt-hirschau.de;
Lead-Acid battery | 6 V | 4.500 mAh | maintains free
Luxeon LED
3 W
300 lm
5.300 K
1: Focus light 30 % | Runtime 30 h | Lighting range 50 m
2: Focus light 70 % | Runtime 25 h | Lighting range 100 m
3: Focus light 100% | Runtime 20 h | Lighting range 150 m
4: Flashing light | Runtime 35 h | Lighting range 150 m
150 m
35 h
20°
105°
yes
Switching adaptor (100-240 V AC, 50/60 Hz
DC adaptor (12 V DC)
14 h
yes
yes
yes
III
IP 44
-10 °C to +50 °C
Plastic
blue
287 x 127 x 120 mm (lamp)
132 x 112 x 55 mm (wall charging base)
1.58 kg (lamp)
0.10 kg (wall charging base)
312208
7
9 V DC, 500 mA)
www.ivt-hirschau.de