FEATURES / FUNCTIONS
• High-performance 3 W LED with 300 lumen
• Lamp range approx. 150 m at full power
• 3 performance levels
• Maintenance-free lead-acid battery 6 V/4.500 mAh
• Charge status display
• Swivel lamp head
• Flashing function
• Emergency light function
• Incl. yellow diffusing plate
ROTARY SWITCH AND BATTERY STATUS INDICATOR
1
EMERGENCY LIGHT FUNCTION
In case of power failure the signal lamp switches on automatically. To use this function follow below steps::
1. Connect charging adaptor with wall charging base and 230V power supply
2. Turn on the work lamp in the requested light mode
3. Place the work lamp in the wall charging base – the lamp turns off
Simulation
emergency light funktion
ELECTRONIC DEEP DISCHARGE PROTECTION
This work lamp is equipped with an electronic deep discharge protection in order to protect the rechargeable battery.
This prolongs the lifetime of the rechargeable battery and protects the environment.
CHARGING THE BATTERY
This work lamp contains a rechargeable lead acid battery. It can be charged by the 230 V power supply.
Alternatively, you can also charge the lamp the 12 V DC connetor in a vehicle.
The matching charging adapter is also included in the delivery.
• Before initial use please charge for approx. 14 hours.
• Lead-acid rechargeable batteries achieve their longest life time if they are stored in full condition. Reconnect the
signal lamp to the charger after use. The work lamp can remain connected to the charger permanently. The electronic
charging switch ensures optimum charging conditions. Thus the rechargeable battery cannot be overcharged.
2
3
Remove the charging adaptor from the 230 V power socket.
The work lamp turns on automatically.
1. Battery status indicator
2. Warning light function
3. Power level 1 (100%)
4. Power level 2 (70%)
5. Power level 3 (30%)
6. Off
1. Battery is empty if LED 1 flashes red
2. LEDs 2 (red, yellow, green) are on when charging is
completed.
3. The green LED 3 lights permanently when the
rechargeable battery is full.
6