Starting The Setup Wizard; Main Menu - Kenwood CR-ST100S Mode D'emploi

3.8 Starting the setup wizard

For a simple and quick initial start-up (setting the time and date, setting up the internet connection,
etc.), we recommend that you run the setup wizard. To do this, please select "YES". If you want to skip
the setup wizard, select "NO".
All settings that are made using the setup wizard can later be made individually via the system settings.
Alternatively, the setup wizard can be run again at any time.
Then select "YES" or "NO" to run the setup wizard automatically or not to run the next time the radio
is started. Then you are at the Main menu.
• Date/Time
12/24 hour format
• Auto update (Time & Date)
Update from DAB or FM (recommended).
With the automatic update via the radio network FM / DAB / DAB +, the time and date are pro-
vided by the broadcasters. When adjusting via these sources, the time is set correctly even after
a power failure. This means that set wake-up times can also be observed.
• Update from NET
When this option is selected, the time and date are automatically set via the Internet connec-
tion.. In addition, the time zone and summer/winter time can be adjusted.
• No update
The time and date must be set manually.
• Keep network connection
The network configuration is discussed in more detail in Section "System Settings".

4. Main menu

The Main menu contains the various audio sources and setting options:
• Internet radio
• Podcasts
• Spotify
• Music player (USB)
• DAB
• FM
• Bluetooth
• Aux-in
• Snooze
• Alarm clock
• System settings
With a selected audio source, press the <MENU> button on the remote control or on the device and
select "Main menu".
9