Carrera 2432.8 Mode D'emploi Et Garantie page 22

IM_Temp Precise_D-GB-F-I:IM_Temp Precise_dt-engl-ital
Important! The adhesive side of the protective sheath must
point in the direction of the housing.
Precise measurements can only be obtained with exactly
mounted protective sheaths.
3. Then, put the ring with the protective sheath over the meas-
urement probe “ and press it carefully in the direction of the
housing until it latches (Direction (2) in Figure 2).
The icon "
cover has not been attached correctly, this icon is blinking.
Consequently firmly push the rim of the protective sheath over
the measurement probe as far as it will go.
4. Please clean the auditory canal of the ear with a cotton bud
carefully.
18
l
>
" is permanently displayed. In case the probe
Mounting ring
Protective sheath
Figure 2
soft side
Adhesive side
05.06.2007 1