DEACTIVATION PROCEDURE
To deactivate the "CL" function simply press and hold both buttons for 5
seconds. "CL" will flash at the rate of 1 second on and 1 second off for a period
of 2 seconds and then resume the display of room humidity.
REPLACEMENT OF WICK
CAUTION: Before changing wick, ensure unit is turned OFF and unplugged.
NOTE: This unit uses 2 model 1040(CN) wicks. Change after every 30 to 60 days
of operation to maintain optimum performance. In hard water areas, more
frequent replacement may be necessary to maintain your humidifier's efficiency.
1) Remove both bottles.
2) Depress both latches to remove grille and wicks.
3) Replace wicks and grille, latches will snap in place.
4) Replace bottles to original position.
7