Important - Panasonic WV-CP290 Manuel D'utilisation

4
The coaxial cable(procured locally) is connected to this video output connector.

Important:

• Be sure to turn off the power of each device before connection.
• Be sure to secure the coaxial cable connectors.
Connect a coaxial cable to the video output connector.
5
Use a cable tie (locally procured) to attach the coaxial cable to the camera mount
bracket.
Important:
• The cable tie shall be made of metallic or durable material to be strong enough because
the tie plays the role of camera drop prevention measures in case.
• When the camera mount bracket is mounted on a wall, be sure to observe the mounting
height described on the illustration below.
<Installation sample on a ceiling>
Camera mount
bracket (option)
14
BS . .
D/N BLC
ON ATW
ON ON INT
OFF OFF LL
OFF AWC
VIDEO OUT
120V 60Hz
~
WV-CP290
The cable shall be
tied to the camera
mount bracket to
avoid slack.
Coaxial cables
To video input
<Installation sample on a wall>
_
Camera mount
bracket (option)
The cable shall be
tied to the camera
mount bracket to
avoid slack.
More than
270 cm
Floor