Manual Clock Adjustment; Date Adjustment; Amp Control; Demonstration Mode Setting - Kenwood KDC-X592 Mode D'emploi

Other Functions

Manual Clock Adjustment

1
Select Clock Adjustment item during Menu
mode (In Standby mode)
Select the "Clock Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Clock adjustment mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjusting Clock
Operation type
Selecting the item (hours or
minutes)
Adjust each item
4
Exit Clock adjustment mode
Press the [FNC] button.

Date Adjustment

1
Select Date Adjustment item during Menu
mode (In Standby mode)
Select the "Date Adjust" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Date adjustment mode
Press the Control knob for at least 1 second.
The date display blinks.
3
Adjusting Date
Operation type
Selecting the item (month, day,
or year)
Adjust each item
4
Exit Date adjustment mode
Press the [FNC] button.
14
|
KDC-X592/ KDC-MP538U
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.
Operation
Push the Control knob towards right
or left.
Turn the Control knob or push it
towards up or down.
Function of KDC-X592
When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.
1
Select AMP Control item during Menu mode
Select the "AMS Control" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards up or down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards right or left.
5
Exit AMP Control mode
Press the [FNC] button.

Demonstration mode setting

Turning the demonstration mode ON/OFF.
1
Select Demonstration item during Menu mode
Select the "DEMO Mode" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Pressing this button for 2 seconds or longer toggles
the setting between "ON" and "OFF".
3
Exit Demonstration mode
Press the [FNC] button.