TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
TV does not
• Try another AC outlet.
operate
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems,
tune to another station.
Poor sound
• Check sound adjustments (VOLUME and
or No sound
MUTE).
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor picture
• Check antenna or CATV connections, adjust
or No picture
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,
tune to another station.
Poor recep-
• Make sure channels are set into memory.
tion on some
• Station is weak, adjust antenna to receive
channels
desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor colour
• Check picture control adjustments.
or no colour
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
Picture
tune to another station.
wobbles or
• Make sure channels are set into memory.
drifts
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
No CATV
• Station or CATV system problems, try
reception
another station.
• Check antenna connections, adjust or
Horizontal or
re-direct antenna.
diagonal bars
• Check for sources of possible interference.
on screen
SPECIFICATIONS
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
ACCESSORIES
Remote Control
Instruction Manual
120V, 60Hz
130 Watts
IC Solid state
32" (measured diagonally)
5.0 + 5.0 Watts
46mm x 99mm (1-13/16" x 3-7/8")
Full Range,
8 ohm x 2
181 Channel, Quartz PLL-
Frequency Synthesized
Infrared, Direct Access,
2 x AAA batteries
(not supplied)
SYMPTOMS
• Make sure TV/CATV menu option is in the
No reception
appropriate mode.
above
• If using antenna, check UHF antenna
channel 13
connections.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
(within 5 metre).
No Remote
• Make sure Remote is aimed at sensor.
operation
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
TV shuts off
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
Closed
• Check CATV connection or VHF/UHF
Caption is
antenna, reposition or rotate antenna.
not activated
• Press TV/CAP/TEXT button to turn on the
closed caption decoder.
Display is not
• Select proper language in the menu options.
shown in your
language
• Fully depress CODE SET button and VCR or
The remote
CABLE button at the same time. Then enter
control does
the code that operate your product within 10
not register
seconds.
your product
• Install new batteries.
• Press the button of the product you want to
The remote
control (TV, VCR, Cable box).
control does
• Program remote with a different code.
• The remote control may not be compatible
not operate
with your product.
your product
• Install new batteries.
The remote
• Program remote with a different code.
control does
• The remote control may not be able to
not operate
operate all features of your product.
some
features of
your product
Receiving Channels:
VHF
UHF
CATV
Input/Output:
S-Video
Video:
Audio:
Antenna: VHF/UHF IN 75 ohm coaxial
Dimensions:
751mm (W) x 554mm (D) x 659mm (H)
(29-9/16" (W) x 21-13/16" (D) x 25-15/16" (H))
Weight:
52.0kg (114.7lbs)
POSSIBLE SOLUTIONS
2-13
14-69
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
Y-Input : 1.0Vp-p/75 ohm
C-Input : 0.3Vp-p/75 ohm
In (RCA) 1.0Vp-p/75 ohm
Out (RCA) 1.0Vp-p/75 ohm
In (RCA) –8dBm/50K ohm
Out (RCA) –8dBm/1K ohm
13