Krups ESPRESSERIA AUTOMATIC EA 80 Série Utilisation Et Entretien page 71

To run the descaling programme, select the
"Start" option and validate with the OK but-
ton. Then follow the instructions on the
screen.
A message will invite you to pour the
contents of the descaling sachet into the
water tank.
Use a large spoon with a long handle to
mix the water in the tank or remove the
water tank and carefully shake it from left
to right until the descaler is dissolved.
Run the descaling programme right to the
end.
!
Note : The pump operates intermit-
tently. It is essential that you wait until the
descaling programme is completely fini-
shed (after around 22 min).
A message on the screen will indicate when the programme is finished.
! Caution : If the descaling pro-
gramme is interrupted by a power cut or
accidental unplugging of the machine, it
must be started again from the begin-
General maintenance guidelines
Rinse the cleaning drawer (8), the drip
tray (23) and the used coffee collector
(7) under running water. Use washing up
liquid if required.
Rinse the water tank (10) in clean water.
Clean the body of the appliance and its
Use and maintenance / SERIE EA 80xx
KRUPS Espresseria Automatic
! Caution : Avoid any contact with the
descaling liquid that runs from the machine, as
it contains substances that are bad for your
health.
Keep the descaler out of the reach of children !
ning. A new descaling sachet will be re-
quired in this case. The programme must
be started again completely in order to
rinse the water circuit and eliminate any
traces of harmful descaling products.
parts and accessories with a damp cloth.
Do not use corrosive or abrasive cleaning
products.
!
Caution : these accessories are not
dishwasher proof.
31