XTERRA Fitness ERG200 Guide D'utilisation page 10

3 ATTACHING SLIDING RAIL FRAME
1. Insert the sliding rail (26) to the u type connect tube (58). Secure
using four sets of allen bolt (24) and washer (25) on the bottom,
two sets of allen bolt (24) and washer (25) on the top.
2. Attach collar (22) to each side of the track on this end of sliding
rail (26). Secure using one allen bolt (23).
3. Slide the Seat (11) onto the sliding rail.
4. Repeat same procedure for other two collars (22) to the other
end of sliding rail (26).
5. Attach the end cap for sliding rail (5L/R) to the back of sliding rail
(26).
Attach the rear stabilizer (28) to sliding rail (26). Secure using
6.
four sets of allen bolt (24) and washer (25).
customerservice@dyaco.ca
11
5R
5L 22 23
22
23
25
28
26
22 23
25
24
23
58
22
25
24
1
24
10
Hardware Step 3
10 Allen Bolt (#24)
10 Washers (#25)
4 Allen Bolt (#23)
Dyaco Canada Inc 2017