Product Description - oneConcept 10029330 Mode D'emploi

• When the power cord and Plug are damaged, for safety , it must be changed by the pro-
fessional person from our appointed maintain station or our company's after-sale service
department.
• Do not install the washer near to any dampness place such as bathroom. Be sure not
to splash or pour water on the control panel where the timer and switches .are located.
• Do not use water hotter them 50 °C.
• If washer installed on the ground with blanket, the blankets are not allowed to jam the
intake.
• Do not wash down feather garments, raincoat, and other watering cloth in order to avoid
vibrate abnormally while washing.
• Never put your hands into the wash/drying tub while the washer is operating. It can cause
injury especially pay attention on children Do not allow children to lean on the washer
• Do not breakdown, repair or refit by yourself.
• Do not put any hot, heavy or fragile stuff on the washer (i.e. water bottle with hot water).
• Do not wash any cloth with which dye volatility stuff such as gas or fuel.
• Children and deformity are not allowed to use this machine.
• Keep away from the place where it is exposed to the sun and do not close to central beating.
• Do not share one power cord with other electrical machines, if there are damages on the
ping. do not use it too.
1 Base
2 Body
3 Drain pipe
4 Pulsator
5 Filter tissue
6 Wash cover
7 Wash timer
8 Program switch
9 Drain swith
10 Spin timer
11 Spin cover
12 Spin tub
13 Plug

Product Description

9