Horizon Global 63070 Instructions D'installation

Reese Towpower Farm & Ranch:
• 7094333 – Shank
• 7093533 – Triball Head
• 7093333 – Dual Ball Head
• 7074833 – Pintle Plate Only
Shank Pin & Clip
Pin & Clip
(Sold Separately)
Spindle Pin & Clip
1. Insert shank into hitch receiver and attach pin & clip (sold separately).
2. Insert tri-ball assembly onto the shank, adjust to proper height and attach shank pin & clip.
(Height adjustment is in increments of 1.25 inches.)
3. Remove spindle pin & clip, rotate to select ball size or step, and reinstall spindle pin & clip.
Note: See Figure1 for maximum drop position and Figure 2 for maximum rise position.
Figure 1: Max. Drop Position
Note: Check for proper ball mount height with vehicle and trailer loaded for travel. At proper
adjustment the trailer coupler and tongue should be level with the ground. See Figure 5.
Note: check hitch frequently, making sure all fasteners are properly tightened. A hitch or ball which has been damaged should be removed and replaced.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
©2020 Horizon Global™ Corp. – Printed in China
Installation Instructions
Adjustable Tri-Ball Mount
Replacement Parts:
• 63911 –Cast Shank
• 63075 – Adjustable Tri-Ball Mount
system, Head Unit Only
• 63076 – Adjustable Dual Ball Mount
System, Head Unit Only
Shank
3
4 /
4
Figure 2: Max Rise Position
Figure 5: Proper Ball Height
Tri-ball Assembly
11
5 /
16
Trailer Tongue Level
Sheet 1 of 3 63070N
Part Number:
63070,7068900, 7068933
Do Not Exceed Lower of Towing Vehicle
Manufacturer's Rating or
" Ball
7
1 / 2,000 Lbs (907 Kg)
8
2" Ball
10,000 Lbs (4535 Kg)
" Ball
5
2 / 14,000 Lbs (6350 Kg)
16
Dual Ball Mount
P/N: 63071
Pintle Mount
P/N: 63072
Figure 3: Adjustable Step Position
08-05-20 Rev. E