Horizon Global 63071 Instructions D'installation

Fastener Kit:
63071F
Pin & Clip
(Sold Separately)
1. Insert shank into hitch receiver and attach pin & clip (sold separately).
2. Insert dual ball mount onto the shank, adjust to proper height and attach shank pin & clip.
(Height adjustment is in increments of 1.25 inches.)
Note: See Figure1 for maximum drop position and Figure 2 for maximum rise position.
Figure 1: Max. Drop Position
Note: Check for proper ball mount height with vehicle and trailer loaded for travel. At proper
adjustment the trailer coupler and tongue should be level with the ground. See Figure 5.
Note: check hitch frequently, making sure all fasteners are properly tightened. A hitch or ball which has been damaged should be removed and replaced.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and
SAE J684.
©2017 Horizon Global™ Corp. – Printed in Mexico
Installation Instructions
Adjustable Dual Ball Mount
Shank Pin & Clip
7
5 /
8
Figure 5: Proper Ball Height
Dual Ball Mount
Shank
Trailer Tongue Level
Sheet 1 of 3 63071N
Part Number:
Do Not Exceed Lower of Towing Vehicle
Manufacturer's Rating or
2" Ball
10,000 Lbs (4535 Kg)
" Ball
5
2 / 14,000 Lbs (6350 Kg)
16
Tri-Ball Mount
Pintle Mount
Figure 2: Max Rise Position
07-10-17
Form: F205 Rev C 9-17-2012
63071
P/N: 63070
P/N: 63072
5
4 /
8
Rev. C