GE GTE21 Série Mode D'emploi page 20

REVERSING THE DOOR SWING (Cont.)
REVERSING DOOR HANDLES –
4
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF
THE FREEZER DOOR
1. Remove the two screws securing the top end
of the handle with a Phillips screwdriver and
remove the GE Appliances badge.
2. For Plactic handle: Pull
handle up and off of the
fastener on the door
For Stainless
Steel handle:
Loosen set
screw on
handle with
and remove
handle.
3. Remove the fastener from the surface of the
refrigerator door, and cover the new vacant
hole with the plug from the opposite side.
20
Installation Instructions
REVERSING DOOR HANDLES –
4
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR (Cont.)
4. Remove the plug
button from the surface
of the right side of the
refrigerator door and
insert the fastener with
a Phillips screwdriver.
5. For Plasic handle:
Attach handle to
fresh food door
on fastener and
slide downward
to lock in place
with the screws
at the top of the
handle.
For Stainless Steel handle:
Attach handle
to fresh food
door with
screws at
the top of the
wrench to
tighten the set
screw at the
bottom of the
handle.
NOTE:
49-60726-3