Troubleshooting; Technical Specifications - Exquisit MU 3001 we Instructions

19 Troubleshooting

Error
The jug is not sitting correctly
on the drive unit.
The security cover does not sit
The blender
correctly on the mixing bowl.
is not
functioning
The power cord is not properly
connected in the socket.
The socket has no electricity.
The speed control is not turned
up far enough.
The blades
A not suitable for mixing good
do not
is in the mixing bowl.
rotate.
When in doubt, consult a qualified expert.

20 Technical specifications

Model
Rated voltage (V)
Frequency (Hz)
Power [W]
Power Settings
Bowl capacity [L]
EAN
Possible reason
KM 3001 we
220~240
50~60
500
5
3,8
4016572021288
Solution
Set the speed control to level
"0" and unplug the power cord
from the socket.
Put the jug on the drive unit,
as described in "Compose
blender".
Set the speed control to level
"0" and unplug the power cord
from the socket.
Place the safety lid on the
blender jug,
as described in "Compose
blender ".
Connect the power cord
correctly to a socket.
Check the socket by
connecting another device.
Turn the speed control
clockwise until the blender
starts.
Set the speed control to level
"0" and unplug the power cord
from the socket. Empty the
mixing bowl.
EN
page | 29