Exquisit MU 3001 we Instructions page 25

the jug so that the long edge,
looked from the handle, is
placed to the right of the
handle.
4. Turn the safety cover
clockwise until it stops.
5. The long lead is now under
control.
6. Put the lid insert 1 in the filling
opening, so that the two lugs
fit into the recesses in the
filling opening on the lid and
fix the lid insert by rotating
clockwise till it stops.
7. You have successfully
assembled the blender jug
17 Operating instructions
WARNING
• Improper handling of the
blender or individual
instruments can cause serious
injury. Do not touch the knife
with bare hands, the blades
are very sharp.
• Do not remove the safety cap
until the blades have
completely stopped.
• Do not change the location of
the blender while the blender
is running.
Make sure that hands, hair,
clothing, jewelry or another
object during the mixing process,
and as long as the mixing
container is located on the drive
unit, are not getting in the jug.
Always make sure that the speed
controller is at level "0" (off)
before connecting the blender to
a socket.
WARNING
When processing hot mixing
goods it can cause scalding.
Do not put hot or boiling mixing
goods (such as soups) in the jug.
WARNING
• Improper handling of the
blender can lead to damage
of the blender.
• Take note of the level marks.
Fill the mixing bowl at least to
the lowermost mark (250 ml)
and do not exceed the "MAX"
(1500 ml) mark.
• Do not operate the blender
without mixing goods.
• Observe the maximum
operating time of 60 seconds.
• A too long operating time can
lead to overheating of the
engine. Allow the blender to
cool on room temperature
before using it again.
• Before turning on the blender,
make sure no cutlery or the
like is in the mixing bowl.
• Do not place over-sized pieces
in the blender jug.
• Make sure when you use
frozen fruit that you always
use the fruit in small pieces.
• Do not mix nuts in shell or
seeds.
• Always remove any existing
stems or stalks from mixing
goods before you start the
mixing process.
• Do not place meat in the
blender.
• Never open the safety cover
during the mixing process.
• Clean the mixing bowl after
each use as described in
"Cleaning".
EN
page | 25