Product Features - ION iPTUSB Guide D'installation

PRODUCT FEATURES

1. Platter: Place your record on the platter.
2. Control Panel:
detailed section on the control panel features.
3. On Board Speaker:
listen to the audio.
4. Tone Arm Clip: Use this clip to secure your
tonearm when storing and transporting the
unit.
5. Tonearm: This unit comes with a ready to
use pre-balanced tonearm and cartridge. The
cartridge is user replaceable with parts from
your distributor located in the warranty guide.
The platter starts spinning once the
tonearm is lifted over the record.
6. 45 Adapter: Use this adapter with 45 rpm
records.
OUTPUT PANEL FEATURES
Power Switch: Use this switch to turn the power on
1.
and off.
AC In: This turntable is designed to work with either
2.
batteries or the power supply cord that comes with
it. While the power is switched off, plug the power
supply into the turntable first, then plug it into the
wall power outlet, then switch on. NOTE: This unit
can also be powered by 6 "D" Cell batteries (Not
Included).
Master Output (RCA): This "line level" output is for
3.
connecting to the input of an external audio device
such as a DJ mixer, tape recorder, CD Burner, PA
system, powered speaker, or a home stereo. The
level of the master stereo output signal is controlled
by the audio level control.
1/8" Headphone Jack: Use this jack with the 1/8"
4.
mini headphone plug. NOTE: Be sure the volume
control is set to the OFF position before plugging in
any headphones to avoid permanent hearing
damage.
1/4" Headphone Jack: Use this jack with the 1/4"
5.
headphone plug. NOTE: Be sure the volume control
is set to the OFF position before plugging in any
headphones to avoid permanent hearing damage.
Please see the alternate
Use this speaker to
7. Dust Cover: This cover protects the turntable from
dust and abuse while not in use or while in
transport.
8. Dust Cover Latch: This latch holds the dustcover
securely in place, and can easily be opened by
sliding it to the left.
9. Carry Handle: Use this handle easily remove the
unit from record crates and bags, as well as carrying
it in transport.
10. Battery Cover: This holds the batteries securely in
place during use and transport. It easily slides open
and closed as indicated on the cover itself.
NOTE: This unit uses 6 "D" cell batteries (not
included). They should be installed in the proper
direction indicated.
USB Audio Output: Use the included USB Cable
6.
to connect your turntable to your computer. Refer to
the software instruction guide before plugging in
your turntable.
Gain: This knob can be used to adjust the gain level
7.
of the audio signal from the turntable. If the audio
from the turntable is too quiet or too loud, use this
knob to adjust the volume setting.
1/8" Stereo Line Input:
8.
Reel to Reel, or any other audio source here. This
signal is sent to the computer through the USB
connection. Make sure that your phono cartridge
is installed while using this input for maximum
sound quality.
jacks are either plugged into an input device or not
in contact with metal.
Note: The 1/8" audio input is not routed to the
turntable's RCA output jacks, only to your computer
via USB.
Connect Tape Players,
Also make sure that your RCA