Daewoo DI-40HVF-3P2 Mode D'emploi page 4

73/23/EEC amended by Directive 93/68/EEC) and
2014/30/EU (repealing Directive 89/336/EEC).
18.
WARNING !!! If the power cable is damaged, it must
be replaced by the manufacturer, its after sales
service or similar qualified persons in order to avoid
a hazard.
19.
The plug must be removed from the base before
cleaning the appliance or undertaking
maintenance operations.
20.
Once the device is assembled, it is forbidden to
remove the grilles.
21.
This appliance is intended to be used indoor &
household.
22.
Regarding the correct assembly of the device,
refer to page 5 of the corresponding instructions.
23.
For cleaning and maintenance instruction, refer to
page 5 of the corresponding section
24.
User instructions should be provided with the
device so that it can be used safely.
ASSEMBLY
BASE ASSEMBY
USE AS STAND FAN
Assembly the tube on the base by tighten the four screws and insert the base
ring down over the round base.
The height of the fan can be adjusted by loosening the height adjustment ring.
Raise or lower the fan and carefully tighten the screw.
Insert the fan body in the main tube and tighten the screw to secure the
connection tube.
GB-4