FAR HD500X-15M Manuel D'utilisation page 22

ENGLISH
• Protect the cooktop surface below with cardboard, or the like, to prevent damage
occurring whilst the cooker hood is being installed above.
• The manufacturer shall not be liable for failure to observe all safety regulations in
force for the correct and normal operation of electrical parts.
Installation:
Ensure the power has been turned off before beginning this installation. Plug must
be assembled in places easy to drag and insert.
• The cooker hood should be placed at a distance of 65-75cm from the cooking
surface for safety and best effect. See Pic.1.
• There shall be enough room for the installation.
• Install the hook on a suitable place once the installation height is fixed, and keep
it in line. The fixed position of the interior chimney bracket is the place of the
chimney. See Pic.2.
• Install the extension tube on the hood, see Pic.3.
• Put the cooker hood on the hook, then fix the interior chimney bracket by screws,
see Pic.4 and 5.
• Fix the exterior chimney on the hood by screws, see Pic.6.
• Put interior chimney in the exterior chimney, then fix it on the interior chimney
bracket by screws. See Pic.7.
GB-8
Pic.1