DESCRIPTION OF THE DEVICE
1
4
INSTALLATION
Before installing your cooker hood:
• Please read the instructions carefully.
• WARNING :
(for example concrete wall), you can never use these ankles for an other type of wall.
•
• Unpack the hood and check that all functions are working. Ensure that the
voltage (V) and the frequency (Hz) indicated on the serial plate match the voltage
and frequency at the installation site.
• Check that the area behind the installation surface to be drilled is clear of any
electrical cables or pipes, etc.
•
installation if grazed or knocked by tools. Please take care to protect the surfaces
during installation.
1 x hook
5 x wall plugs
5 x large screws
Hood
1.
Exterior Chimney
2.
Interior Chimney
3.
Extension tube
4.
Accessories
5.
2
5
1 x interior chimney
bracket
4 x small screws
2 x safety screws
ENGLISH
3
GB-7