JVC KD-T905BTS Manuel D'instructions page 41

Masquer les pouces Voir aussi pour KD-T905BTS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
Symptom
Remedy
"CH LOCKED LOCK
The selected channel is locked. Enter the correct pass code to
CODE?"
unlock. (Page 14)
"CHAN UNSUB"
The selected channel is unsubscribed.
Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in
Canada to subscribe. (Page 12)
"CH UNAVAIL"
The selected channel is unavailable. For more
information about the SiriusXM channel lineup, visit
<www.siriusxm.com>.
"CHECK ANTENNA"
Check that the antenna and its connection are in good
condition.
"CHECK TUNER"
Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
"NO SIGNAL"
Make sure the antenna is mounted outside the vehicle.
"SUBSCRIPTION UPDATED
Your subscription is updated. Press the volume knob to
– PRESS ENTER TO
continue.
CONTINUE."
"CODE ERROR"
Make sure you have entered the correct pass code.
(Page 14)
"NO CONTENT"
There is insufficient content to start TuneScan.
"SCAN CANCEL"
TuneScan has been aborted.
Symptom
Remedy
No Bluetooth device is
• Search from the Bluetooth device again.
detected.
• Reset the unit. (Page 3)
Pairing cannot be made.
• Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (Page 15)
Echo or noise is
• Adjust the microphone unit's position. (Page 15)
heard during a phone
• Check the [ECHO CANCEL] setting. (Page 17)
conversation.
Phone sound quality is
• Reduce the distance between the unit and the Bluetooth
poor.
device.
• Move the car to a place where you can get a better signal
reception.
Voice calling method is not
• Use voice calling method in a more quiet environment.
successful.
• Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted
• Reduce the distance between the unit and the Bluetooth
or skipped during playback
audio player.
of a Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth
• Check whether the connected Bluetooth audio player
audio player cannot be
supports Audio/Video Remote Control Profile (AVRCP).
controlled.
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
37
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-t900btsKd-t805btsKd-td90btsKd-t700btKd-td70btKd-sr85bt

Table des Matières