Niko 05-206 Mode D'emploi page 39

05-206
4. OPERATION
If the binary input module is set in normal operation mode, the display shows 'status':
1 2 3 4 5 6
_ _ 1
Fig. 6 : 'status'
The display shows the status of every contact input. In the above example, the status
of the different inputs is:
1. auto mode, contact is open
2. auto mode, contact is closed
3. fixed on (contact changes are ignored)
4. auto mode, contact is open
5. fixed off (contact changes are ignored)
6. auto mode, contact is open
5. WARNINGS IN USE
- Connecting the power supply 230V~ 50Hz to terminals 'B1' and 'B2' is strictly
prohibited.
- Connecting the power supply 230V~ 50Hz to contact inputs '1' to '6' and the common
terminal 'C' is strictly prohibited. Only potential free contacts can be connected.
- The polarity between switching module, shutter module, dim controller, RF interface,
GB
_ 0 _
39