Battery Installation; Power Supply; Charging The Installed Battery - 1byone OUK00-0860 Manuel D'instructions

In DAB Mode In FM Mode
Play/OK/ Enter the Menu/ Enter the Menu/
Standby Switch Off & On Switch Off & On
< Button Scroll through Manually search FM
DAB station list & range, press for 2
Control through seconds to
Menu automatically
search FM range
> Button Scroll through Manually search FM
DAB Staton List & range, press for 2
Control through seconds to
Menu automatically
search FM range
Menu/ Press to enter Press to enter Mode
Sleep DAB Mode menu, menu, press again
Button press again to go to go back
back
INFO Cycle through Cycle through
Button information information screens
screens
Preset/ Press and hold to Press and hold to
Pair Button save a station, save a station,
press shortly to press shortly to
enter radio station enter radio station
memory memory

BATTERY INSTALLATION

1. Use a coin to rotate the battery locking screw 90 degrees to unlock the
battery cover.
2. Remove the battery cover with your fingers.
3. Follow the polarity to install the accompanying 3.7V lithium ion battery.
4. Reinsert the battery cover and rotate the locking screw.
5
In Bluetooth Mode
Pause & play current playback,
answer & end a phone call
Return to the beginning of
played track or skip to previous
track
Skip to the next track
Press to enter Mode menu, press
again to go back
Hold the button for 3 seconds to
break the current connection
and activate pairing mode
Warning
1. Be sure that the battery is installed correctly.
2. Only batteries of the same or equivalent type as recommend are to be used.
3. If the unit will not be used for an extended period of time, remove the
battery to prevent damage or injury from possible battery leakage.
4. Batteries should not be exposed to excessive heat such as sunshine or fire.

Power supply

1. Connect the supplied AC-DC adapter to the DC 5V jack on the back of the
unit through the attached USB cable and insert the grid plug into a
properly installed AC socket.
2. Make sure the grid voltage corresponds to the figures on the rating plate.
Warning
1. Only use the supplied power adaptor for this unit.
2. Do not use for other devices.
3. Only use the original AC adapter. This adapter has been specially designed
for the accompanying battery in order to gradually charge the battery. Any
other adapter may shorten the battery life or can damage it or the unit.
4. Disconnect from main power supply during longer periods of non-use.

Charging the installed battery

The installed battery can be charged by plugging the accompanying AC-DC
adapter into a wall socket and the other end into the unit's DC 5V jack. The
battery charging indicator will light up yellow when charging and green
when fully charged.
6