Comelit 6302 Mode D'emploi page 7

Audio key
NOTE: If, after a key is pressed, LED 1 lights up for 4 seconds,
this means the function is not available or the system is busy.
Using basic Smart monitor functions
LEDs 2 and 3 flash in response to a call Fig. 2
` To activate/deactivate the audio, press
Wait for LED 3 to be lit steadily before speaking.
` To activate the electronic door lock, press A .
» LED 2 lights up for 4 seconds and a beep will be emitted to
confirm activation.
1
to activate the Switchboard call or Intercom call
` Press
function. ¹
» A call is transmitted to the corresponding switchboard (if present)
or an intercom.
2
to activate the Self-Ignition function.
` Press
» The image from the corresponding external unit appears on the
monitor.
2
By pressing
units (max. 2 if present).
¹ For further information contact your usual installer
repeatedly, you can switch between the external
.
4