Operating Specifications - Watts IntelliFlow A2C-SC Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Here's a table describing the LED lights on the IntelliFlow.
CONNECTION
WASHER OFF
Multi Color LED FLASHING BLUE
Yellow LED
OFF
Red LED
Red Flashing+
* Wi-Fi can be enabled by pushing Reset Button for 3 seconds
+ Leak Sensor is not installed
++ See Troubleshooting Guide for other LED light combinations

Operating Specifications

Electrical Rating: 120VAC, 60 Hz
Circuit Breaker Requirements: 20A GFI*
Max. Appliance Current Rating: 15A
Current Draw: 20mA (with appliance off)
Electrical Cord: 6 ft. type SJT 14 AWG
Max. Temperature: 180°F (82°C)
Max. Pressure: 150psi (10.3 bar)
Max. Operating Pressure Differential: 80 psi (5.5 bar)
Valve Body: Reinforced Polysulfone
Rubber Goods: Buna-N, EPDM
*Ground Fault Interrupter – A GFI circuit is not required for proper operation of the IntelliFlow,
but is strongly recommended as a safety device. In accordance with National Electric Code,
NFPA 70, Section 210.11 Branch Circuits Required, at least one 20-ampere branch circuit shall
be provided to supply the laundry receptacle outlets(s) required by Section 210.52(F). This circuit
shall have no other outlets.
WARNING
!
*Surge Protection – Although a surge protector is not required for proper operation of the
IntelliFlow, it is strongly recommended, especially in areas where power surges or lightning strikes
frequently occur.
6
IS-A2C-SC-IntelliFlow
NO WIFI
WIFI Enabled
BLUE
OFF
OFF or Red
Flashing+
2122
NORMAL OPERATION++
WASHER OFF
WIFI Disabled
GREEN*
OFF
OFF or Red
Flashing+
WASHER ON
WIFI Enabled
WIFI Disabled
BLUE
GREEN*
YELLOW
YELLOW
OFF or Red
OFF or Red
Flashing+
Flashing+
© 2021 Watts

Publicité

Table des Matières
loading

Produits Connexes pour Watts IntelliFlow A2C-SC

Ce manuel est également adapté pour:

Intelliflow a2c-sc-wb

Table des Matières