Product Description - Uzin Utz WOLFF NEO 400 Mode D'emploi Original

1.0 Product description

Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2.
A
1 Motor
2 Additional weight
3 Brush, back
4 Dust seal ring
5 Holding device, dust seal ring
6 Brush, top
7 Level control, carriage
8 Transport wheel
9 Clamping lever, track extension
10 Connection, vacuum cleaner
11 Plug
12 Display current consumption
13 Allen bolt, adjusting grip
14 Emergency stop switch
15 Button, on
16 Handle adjustment
17 Grip
18 Handle
19 Electronic
20 Allen key with holding
21 Gas prop
Functional description
Please refer to the graphics on pages 2 and 3 while
you read the operating instructions.
Bodenschleifmaschine NEO 400, #76970
08/2015
Restriction of use
The NEO 400 ponceuse portativeis intended
exclusively for dry grinding and milling of coatings and
existing substrates.
When the machine is used in another way, it shall be
regarded as unfit for the purpose.
WOLFF GmbH & Co. KG shall not accept any liability for
damage resulting from nonintended use.
Declaration of Conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standar-
dization documents: DIN EN 1037, EN ISO 12100,
DIN EN 60204-1, DIN EN 60745-1, according to the
provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering of the
technical documentation.
01.02.2015, on behalf of
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply ...........................................3~/400 V AC
Frequenzy............................................................50 Hz
Power consumption ..........................................4,0 kW
Rotation speed .............................................1.500 rpm
Width of grinding .............................................400 mm
Total weight .........................................................90 kg
Additional weight ..................................................15 kg
Includes:
1 Concrete grinding machine NEO 400
1 Spirit level
1 Tool kit
1 Soft-head hammer
1 Manual
1 Spare parts list
15