Operation And Programs; Service Menu; Maintenance - Bremshey Sport TREADLINE PACER Mode D'emploi

OPERATION AND PROGRAMS

Insert the Safety key.
1.
Press the power button. The monitor will turn on.
2.
The program window will
display ENTER WEIGHT. Press the SPEED +/- or
INCLINE +/- buttons to input your weight.
Press ENTER to confirm your setting value. The
3.
program window will display SELECT PROGRAM
OR PRESS START.
Press PROGRAM button to select the desired
4.
program P1-P9 or U1-U3 with the SPEED +/- or
INCLINE +/- buttons.
In the program 1, the program window will display
5.
"MANUAL SPEED & INCLINE". In the program 2
to program 8, the program window will display profile
name. In the program 9, the program window will
display "HRC WEIGHT LOSS". Press the ENTER
button to confirm your desired program.
The program window will display "ENTER YOUR
6.
WORKOUT TIME". The TIME window will flash.
Press + / - button to set up your desired time to do the
exercise. Press the ENTER button to confirm your
setting value.
The program window will display "ENTER YOUR
7.
WORKOUT DISTANCE". The DISTANCE window
will flash, press + / - button to set up your desired
distance to do the exercise. Press the ENTER button
to confirm your setting value.
The program window will display "ENTER YOUR
8.
WORKOUT CALORIES". The CALORIES window
will flash, press + / - button to set up your desired
calories to do the exercise. Press the ENTER button to
confirm your setting value.
In the Program 1 to Program 8, press START to
9.
begin. Use the SPEED + / - keys to adjust the speed
and the INCLINE + / - keys to adjust the elevation. In
preset programs, you can change the resistance level
in the section of the profile you are performing at the
moment.
In the Program 9, the program window will first
10.
display "ENTER AGE". Press + / - button input your
age and ENTER to confirm. The program window
will display "ENTER TARGET HEART RATE",
press +/- button to input desired target heart rate, then
press ENTER to confirm the target heart rate. You can
now enter the target time, distance and calories. Press
the START to begin exercise. Heart rate controlled
exercises enable training at a selected heart rate level.
Heart rate controlled exercises always require heart
rate measurement.
USER 1 TO USER 3
1.
program.
The program window will display "ENTER YOUR
2.
Press + / - button to set up your to do the exercise.
The program window will display "ENTER YOUR
3.
WORKOUT DISTANCE". The DISTANCE
desired distance to do the exercise. Press ENTER
The program window will display " ENTER YOUR
4.
Bremshey_Pacer09_4_spareparts.indd 7
WORKOUT CALORIES". The CALORIES
desired calories to do the exercise. Press ENTER
a.
up desired speed value and press incline + / - to
set up desired incline level.
b.
c.
column by column.
Press START to begin exercise.
5.

SERVICE MENU

During the power ON position (initial mode), first
1.
hold the PROGRAM button then press the ENTER
button together to enter the Service Menu.
Incline window shows model number. Distance
2.
window shows software version, KCAL window
shows year. Time window shows date. Speed window
shows diameter of roller.
Press ENTER button window shows LDU version
3.
and ISP version
Press ENTER button enter KM/MILE switch mode,
4.
Press SPEED + - or INCLINE + - to select KM or
MILE.
Press ENTER button window shows total distance.
5.
Press ENTER button window shows total hour.
6.
Press ENTER button goes back to ON position
7.
– initial mode.

MAINTENANCE

The equipment is safe to use only when periodically
maintained and inspected for faults and wear.
Do not attempt any servicing or adjustment
CAUTION!
other than those described in this manual. Any other
servicing must be performed by an authorized service
representative. Check the tightness of all fixing
screws once a year. Do not overtighten.
CLEANING AND LUBRICATING THE TREADMILL
FAILURE TO LUBRICATE YOUR TREADMILL MAY
INVALIDATE THE PRODUCT'S WARRANTY!
Wipe the treadmill surfaces, especially the handlebars
and console from dust with a damp cloth or towel.
Do not use solvents. Use a small vacuum nozzle to
carefully vacuum around all visible components (belt,
running deck, side rails etc.). Also keep the area near
the treadmill clean. While in use, the treadmill gathers
dust that may cause problems in the operation of the
equipment.
In average domestic use (a maximum of 60 minutes a
day), you should check the lubrication once a month
– however, lubricate the belt only if needed. In more
demanding use, the lubrication needs be checked at
shorter intervals. This is best done before you begin a
training session. Check the lubrication as follows:
Ensure the treadmill is powered off! Step on the
1.
G B
7
22.5.2008 12:07:46