Manufacturer's Warranty - Hilti TE 30­A36 Mode D'emploi

Malfunction
1 LED blinks.
4 LEDs blink.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
10

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
14 English
Printed: 30.04.2019 | Doc-Nr: PUB / 5351688 / 000 / 03
Possible cause
The battery is
discharged.
The battery is too hot or
too cold.
The combihammer has
been overloaded briefly.
The overheating preven-
tion cut-out has been
activated.
Action to be taken
▶ Change the battery
and charge the empty
battery.
▶ Bring the battery to
the recommended
working temperature.
▶ Release the control
switch and then press
it again.
▶ Allow the combiham-
mer to cool down and
clean the air vents.
2173713
*2173713*