Sb18 Subwoofer - Acoustics SB18 Manuel D'utilisation

SB18 8 8 8 SB1
SB1 SB1
COMPACT HIGH POWER SUBWOOFER COMPACT HIGH POWER SUBWOOFER COMPACT HIGH POWER SUBWOOFER COMPACT HIGH POWER SUBWOOFER
USER MANUAL USER MANUAL
USER MANUAL USER MANUAL
VERSION 1.2

5 5 5 5 SB18 SUBWOOFER

SB18 SUBWOOFER
SB18 SUBWOOFER SB18 SUBWOOFER
®
The L-ACOUSTICS SB18 Compact High Power Subwoofer is composed of a single 18" LF transducer loaded in
a dual-vented bandpass enclosure. The transducer contains a 4" coil, an aluminum die-cast basket, and a vented
neodymium magnet. The enclosure provides maximum SPL output and extended low frequency response in a highly
compact and very low profile design.
The association of a specifically designed 18" transducer with a dual bass-reflex tuned enclosure provides exceptional
impact and high sensitivity, low thermal power compression and reduced distortion. The vents feature a progressive
profile allowing laminar airflow and reduced turbulence noise even at the very highest operating levels. These combined
properties contribute to the sonic qualities of the SB18 in terms of precision and musicality.
The nominal impedance of the SB18 subwoofer is 8 ohms.
A single SB18 subwoofer generates an omni-directional coverage pattern.
The SB18 cabinet is made of high grade Baltic birch plywood with remarkable mechanical and acoustical properties for
improved long term durability.
Pole mont socket
Handle (x2)
Protective edge (x4)
SB18_UM_ML_1-2
Front face
Front locator stud (x2)
Connector plate
Figure 3: The SB18 subwoofer
w w w . l - a c o u s t i c s . c o m
Rigging arm and T-BLP (x4)
Rigging point and stacking foot (x4)
8 8 8 8 en