Rear Panel - Denon Professional DN-500BD MKII Guide D'utilisation

Rear Panel

1 1
2
1. Audio Outputs (balanced, XLR): These outputs send the audio signal to your external speakers,
receiver, etc. Use XLR cables to make these connections. See
information.
2. Audio Outputs (unbalanced, RCA): These outputs send the audio signal to your external speakers,
receiver, etc. Use RCA cables to make these connections. See
information.
3. 7.1 Outputs (unbalanced, RCA): These 8 outputs send the audio signal to your 7.1 surround sound
system. Use RCA cables to make these connections. Please refer to the documentation for your sound
system, as well.
4. Coaxial Output: This output sends the digital audio signal to your TV. Use a standard coaxial cable to
make this connection.
5. HDMI Output: This output sends an HDMI audio and video signal from an external device. Use a
standard HDMI cable to make this connection.
6. LAN Port: This input lets you connect a host device (usually a computer) to DN-500BD MKII. You can
use the host device to control DN-500BD MKII via commands sent from it. Alternatively, use this
connection to access the internet. Use a standard Ethernet cable to make this connection.
7. USB Input: This input receives the audio and video signal from a connected USB device. Use a
standard USB cable to make this connection.
8. Remote Input: This input lets you connect a host device (usually a computer) to DN-500BD MKII. You
can use the host device to control DN-500BD MKII via commands sent from it (using RS-232C serial
communication). Use a standard Ethernet cable to make this connection.
9. AC In: Use the included power cable to connect this input to a power outlet. See
Connections for more information.
4 5
3
7.1
6 7 8
Setup > Connections
Setup > Connections
9
for more
for more
Setup >
5