Alto Professional Uber FX Guide D'utilisation page 6

Features
Front Panel
15
2
2
1. Combo Inputs with Volume Control: Use a standard 1/4" (6.35 mm) TRS or XLR cable
(not included) to connect your sound source to each input. Use the Volume knob to adjust
the level of each one.
2. Line/Mic Switch: Use this switch to set the Input to accept either a Line-level or Mic-level
sound source.
Note: When using an instrument with passive pickups, set the switch to the Mic setting.
When using an instrument with active pickups, set the switch to the Line setting.
3. Bluetooth: The Bluetooth LED will be lit when a device is paired to Uber FX. This LED will
not be lit when Uber FX is first powered on (unless it was previously paired with a device).
Press the Bluetooth button to disconnect a paired Bluetooth device.
4. Auxiliary Input with Volume Control: This stereo 1/8" (3.5 mm) input can be used to
connect a CD player, MP3 player, or other audio source. The Volume control adjusts
auxiliary input and Bluetooth volume.
5. Hi EQ (Treble): Adjusts the high (treble) frequencies of the channel.
6. Lo EQ (Bass): Adjusts the low (bass) frequencies of the channel.
7. Effect Level: Adjusts how much of the internal effect will be applied to the channel.
8. Effects Selector: Selects the effect that Uber FX's internal effects processor (powered by
Effects by Alesis) will apply to the various channels. Each channel can send different levels
of audio to the processor by adjusting their Effect Level knob. See
for an explanation of the available effects.
6
1
5
8
6 7
11 12
3 4
9
10
Operation > Effects
13
14