Ego Power+ LM2140SP Guide D'utilisation page 48

Problem
Mower is
difficult to pull
back when the
self propel is
turned off
The motor
works but the
blade doesn't
cut the grass
Short running
time of the
mower with
included
battery
48
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2140SP/LM2140SP-FC
Cause
◾
The wheels are temporarily
locked.
◾
The blade is not tightened to the
required torque.
◾
Grass conditions and cutting
height setting will greatly affect
the battery run time. The claimed
run time is based on a light load
condition.
Solution
◾
Simply push ahead slightly
and then move the mower as
desired.
◾
Re-tighten the blade. The
recommended torque for the
blade bolt is 36-43 ft-lb (49-
59Nm).
◾
Raise the blade height and slow
your pace to reduce the cutting
load.