Rf Signal Display; Setting Up The Outdoor Sensor; Selecting The Temperature °C/°F; Display Of Indoor And Outdoor Temperature - Conrad 672182 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RF Signal Display

The RF signal display in the basis device now shows the following:
no signal received
Signal received
Received successfully

Setting up the Outdoor Sensor

- The max. distance between the outdoor sensor and the basis device should not
exceed 30 m!
- Always place the outdoor sensor in such a way that it can focus on the basis station!
(Trees, doors, walls, furniture, etc. may be a hindrance.)
- The outdoor sensor must not be obstructed and should be placed at sufficient dis-
tance to metal and electronic objects!
- During the cold winter months, the outside sensor should be taken from the pool,
since extreme cold may damage the outside sensor and the inserted batteries!
- The transmission range may vary due to different factors. Therefore, you should
experiment with various installation sites to achieve the best result possible.
Selecting the temperature °C/°F
Use the button "2" (°C/°F) to select whether the temperature is to be displayed in °C
or °F.

Display of Indoor and Outdoor Temperature

The indoor temperature is displayed in the upper display "INDOOR", the outside
temperature in the lower display "POOL TEMP".
26

Publicité

Table des Matières
loading

Table des Matières