LENCO BT-9000 Mode D'emploi page 9

Notes: - There is a few seconds delay when programming, after this delay time, the unit will automatically
switch back to normal tuner mode.
- You can overwrite a preset station by overwriting and storing the new station.
Recalling Preset Station
Press the CH +/- button from the remote control. The preset channel number and station names appear on display
then press the ENTER button to conirm selection.
Change listening channel
1. Whilst listening to current channel, press the
displayed.
2. Press the ENTER button to conirm the selection.
Display DAB radio station information
If necessary, you may press the RDS button from the remote control to display current receiving DAB station's
information.
The CD player can playback CD/CD-R/CD-RW disc with Audio CD and MP3 format.
CD Playback
1. Press the STANDBY
2. Press the FUNCTION button from the main unit or the CD button from the remote control to select CD mode.
3. Insert a CD with printed side facing up into the CD slot.
4. Music playback will automatically start.
5. For Audio CD format disc ---- The display will show the "CD" indicator and the track number (e.g. T001).
For MP3 ile format disc
6. Adjust the volume level by rotating the VOLUME knob from the main unit or press the VOLUME +/- button from
the remote control.
7. To skip to a desired CD track, press the
/ buttons from the remote control to select the desired folder.
8. To fast-rewind or forward within the currently playing track, press and hold either the
unit or the / button from the remote control.
9. To pause CD playback, press the play/pause
To resume playback, press the play/pause
10. To stop CD playback, press the STOP
11. To eject the CD, press the OPEN/CLOSE
CD Play Modes
Repeat Playback
● For Audio CD discs :
To repeat playback of one track, press the REP button once from the remote control. A repeat one indicator
" "appears on the LCD.
To repeat playback of an entire CD, press the REP button until the repeat all "
● For MP3 discs:
To repeat playback of one track, press the REP button once from the remote control. A repeat one indicator
" " appears on the LCD.
To repeat playback a directory, press the REP button twice. A repeat directory indicator "
LCD.
To repeat playback of an entire CD, press the REP button until the repeat all "
Random Playback
To playback CD tracks in random order, press the RAN button from the remote control.
The "RND" indicator appears on the LCD.
INTRO Playback
To playback the irst ten seconds of each song, press the INTRO button from the remote control until "INTRO"
indicator appears on LCD.
Cancel CD play mode
To cancel a CD play mode, press the STOP
DAB / DAB+ Tuner Operation
Listening to CD Music
button to turn on the unit.
---- The display will show the "MP3" indicator, Folder number (e.g. A01) and the track
number (e.g. T001).
/
button again.
button.
button.
button at any time.
/ button repeatedly until the desired channel name is
buttons. If it is playing the MP3 song, you may press the FOLDER
button.
GB 9
/ button from the main
" indicator appears on LCD.
DIR" appears on
" indicator appears on LCD.