Sliding Speaker - LG UB85 Serie Manuel D'utilisation

y Disconnect the power first, and then move or
B
install the TV. Otherwise electric shock may
occur.
y If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
y Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation
manual and necessary parts.
y The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y The length of screws may differ depending on
the wall mount. Make sure to use the proper
length.
y For more information, refer to the manual
supplied with the wall mount.
y When attaching a third-party wall mounting
bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to move
your TV in vertical angle. Please make sure
not to use the spacers for LG wall mounting
bracket. (Only UC97**, UG88**)
CAUTION
NOTE
Wall Mount
Inner Spacer
ASSEMBLING AND PREPARING

Sliding Speaker

(Only 98UB98**)
Sliding Speaker
1 When TV is turned ON - the hidden speaker slides
out from inside the TV.
(Home) ➡ (Settings) ➡ Sound
2 Go to
➡ Sound Out ➡ Sliding speaker to set Sliding
Speaker.
- Please Do Not use excessive force during
operation of internal sliding Speaker as it may
cause it to malfunction.
- Make sure Speaker is in OPEN position when
viewing TV as sound will be abnormal or
distorted.
3 When transporting the TV, make sure that the Sliding
Speaker is closed. If the Sliding Speaker is open
when being transported, it may become damaged,
resulting in malfunction.
- To close the Sliding Speaker, go to Sound ➡
Sound Out ➡ Sliding speaker, select 'Opens
when TV is turned on' and press the
(POWER) button.
25