Replacing Saw Chain; Storage; Replacement Parts And Accessories; Technical Service - Remington BRANCH WIZARD Manuel Du Propriétaire

Masquer les pouces Voir aussi pour BRANCH WIZARD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or
when chain breaks. Only use replacement chain noted in
this manual. Always include new drive sprocket when
replacing chain. This will maintain proper driving of
chain. Note: For proper chain and drive sprocket,
see Illustrated Parts List.

STORAGE

If storing Pole Saw for more than 30 days, follow
steps below.
1. Remove and clean guide bar and chain. Clean
2. Dry guide bar and chain.
3. Place chain in container filled with oil. This will
4. Wipe a thin coating of oil over surface of guide
5. Wipe o outside of Pole Saw body. Do this with
6. Store Pole Saw

TECHNICAL SERVICE

We reserve the right to amend these specifi cations
at any time without notice. The only warranty ap-
plicable is our standard written warranty. We make
no other warranty expressed or implied.
For parts contact: www.PartsFor.com
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
prevent rust.
bar.
soft cloth dampened with a mild soap and water
mixture.
• in a high or locked place, out of children's
reach
• in a dry place
• with scabbard over guide bar
REPLACEMENT PARTS AND
ACCESSORIES
WARNING: Use only replacement
parts and accessories described in this
manual. Use of other parts or accessories
could damage saw or injure operator.
For original replacement parts and accessories, con-
tact your nearest Authorized Dealer or Authorized
Service Center for this product. If they can not sup-
ply the part or accessory, contact your nearest Parts
Central listed on page 47. Each Authorized Dealer,
Authorized Service Center, and Parts Central is
independently owned and operated.
See page 46 for an Illustrated Parts List.
If you need additional referral information, contact
our Technical Service Department (see Technical
Service).

REPAIR SERVICE

Note: Only use original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
Each Authorized Service Center is independently
owned and operated.

Warranty service

If product requires warranty service, return it to
nearest Authorized Service Center. You must show
proof of purchase. If faulty materials or workmanship
caused damage, we will repair or replace product
without charge. Note: Normal wear, misuse, abuse,
neglect, or accidental damage is not covered under
warranty.
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dps-1

Table des Matières