Chauvin Arnoux MiniFlex MA110 Notice De Fonctionnement page 30

Read the measurement on the multimeter, applying the reading coefficient indicated on the label on the
electronic unit corresponding to the setting of the switch.
3 A~ range
30 A~ range
300 A~ range
3000 A~ range
Multiply the reading by the coefficient.
For example, a reading of 1 V on the measuring instrument corresponds to a current of
in the 300 A~ range.
2.2.2. DISCONNECTING THE MA130
Withdraw the flexible coil from the conductor, set the switch to OFF, and disconnect the electronic unit
from the multimeter.
2.2.3. IDENTIFYING THE SENSORS OF THE MA130
To identify the sensors and the output leads, you can mark them with the coloured rings provided with
the device.
Clip rings of the same colour on the sensor and on the corresponding output leads.
1000 mV~/A~
100 mV~/A~
10 mV~/A~
1 mV~/A~
30
1 V
= 100 A
10 mV/A