Nickel Trim; Exhaust Hood; Convection Fan Filter; Oven And Cabinet Light Replacement - Heartland 8210 Instructions D'installation Et D'utilisation

Nickel Plated Trim
Nickel plated surfaces may be cleaned with any non abrasive chrome and metal polish (such as
Flitz) or Windex and a soft cloth. If any acid based food or liquid, such as lemon juice or tomato
juice, is spilled on the range, wipe it at once to prevent staining.

Exhaust Hood

An exhaust filter is included with your exhaust hood. The filter may be cleaned periodically in soapy
water. The filter should be replaced every 4 months or when they begin to restrict air flow.
Replacement Filters are available from your dealer or directly from Heartland Appliances.
Please order four or more at one time to save freight and handling charges.
The inside of your exhaust hood should be inspected periodically for grease buildup (a fire hazard)
and cleaned as required with soap and water. Please turn off power to unit when cleaning inside
the hood.

Convection Fan Filter

Filter may be removed and washed in soap and water or washed in a dish washer. To remove
the filter, grasp the filter and pull upwards to unhook it from the deflector. Reverse the procedure
to replace. Filter to be used for Convection Broil/Roasting applications only.

Oven and Cabinet Light Replacement

Before replacing a lamp, disconnect the power at the main fuse or circuit breaker panel. When
replacing light bulbs, wait until the oven and bulb are cool. Remove oven light lens by simply
unscrewing it counter clockwise.
The bulb can then be unscrewed easily. Always handle the bulb with a dry (never wet) cloth to
protect hands. If light bulb should break, disconnect power to range by unplugging it or removing
the fuse from the panel before touching the bulb.
When replacing the bulb, use only a 40 watt oven bulb available at your local hardware store
or appliance dealer.
When cleaning the oven, do not touch lens with a wet cloth.
38