Table Des Matières; Safety Information - Home Decorators Collection 7982HDCBN Guide D'utilisation Et D'entretien

Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Specifications ................................................................ 3
Warranty ......................................................................... 3
Pre-installation .............................................................. 3
Planning Installation ................................................................3
Tools Required .........................................................................4
Hardware Included ...................................................................4
Package Contents ....................................................................5

Safety Information

READ AND SAVE THESE INSTRUCTIONS
1. To reduce the risk of electric shock, ensure the electricity
has been turned off at the circuit breaker or fuse box before
you begin.
2. All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
3. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
35 lbs. (15.9 kg). Use only UL-listed outlet boxes marked
"Acceptable for Fan Support of 35 lbs. (15.9 kg) or less."
4. The fan must be mounted with a minimum of 10 ft (3.05 m)
of clearance from the trailing edge of the blades to the floor.
5. Do not place objects in the path of the blades.
6. To avoid personal injury or damage to the fan and other
items, use caution when working around or cleaning the
fan.
7. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
8. All set screws must be checked and retightened where
necessary before installation.
WARNING: To reduce the risk of personal injury,
during assembly or after installation, do not insert objects in
the path of the blades.
Installation - Mounting Options
Installation
........................................................................
Operation ..................................................................... 10
Preparing the Remote Control .................................. 11
WARNING: To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
WARNING: To avoid possible electrical shock, turn
the electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: To reduce the risk of fire, electric shock
or personal injury, mount to outlet box marked
"Acceptable for fan support of 35 lbs. (15.9 kg) or less", and
use screws provided with the outlet box.
WARNING: Electrical diagrams are for reference only. If
you are using a light kit, refer to the light kit
instructions manual to make the electrical connections.
Optional use of any light kit shall be UL-listed and marked
suitable for use with this fan.
WARNING: To reduce the risk of fire or electric shock,
this fan should only be used with fan speed control
model number E08BT+MR181A-3.
WARNING: To reduce the risk of electric shock, this
fan must be installed with an isolating wall switch.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION: Fan cannot be controlled with a dimmer but
can be controlled with a wall mounted fan speed control.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
2
Please contact 1-800-986-3460 for further assistance.
.....................................
HOMEDEPOT.COM/HOMEDECORATORS
6
7