Installation - Home Decorators Collection 7982HDCBN Guide D'utilisation Et D'entretien

Installation

1
Preparing for mounting
Insert the end of downrod (B) through the connector (PP),

and align the two holes in the downrod (B) and the
connector (PP).
Insert a plug pin (GG) through the two holes in the downrod

(B) and the connector (PP).
Insert the R-shaped pin (HH) though the hole near the end of

the plug pin (GG) until it snaps into its locked position.
Install the screw (FF) to the connector (PP), and make sure

it's tight.
Preparing the canopy and hanger
2
ball
Insert the canopy (C) and metal cover (D) through the

downrod (B).
Insert the hanger ball (J) through the downrod (B), and then

insert a headless plug pin (Q) through the hole in the
downrod (B).
Insert the headless plug pin (Q) to the slot cut off in the

hanger ball (J) until it snaps into its locked position.
Tighten the screw (KK) securely.

B
J
C
D
7
Please contact 1-800-986-3460 for further assistance.
KK
Q
HOMEDEPOT.COM/HOMEDECORATORS