Preparing The Remote Control - Home Decorators Collection 7982HDCBN Guide D'utilisation Et D'entretien

Preparing the Remote Control

IMPORTANT POINTS TO REMEMBER
Please note that all fixed wiring appliances should be installed by a qualified electrician.

The supply to the remote control receiver should be connected through a mains switch, i.e.

existing wall switch.
Disconnect from power supply at the wall switch before working on the remote control

receiver or ceiling fan.
Install the receiver into the ceiling fan canopy of the fan to ensure proper protection.

This unit is to be used for the control of ceiling fan and in an AC110/120V 60Hz power supply

only.
Do not install in damp locations or immerse in water. (For indoor use only.)

Do not pull on or cut leads shorter. Do not drop or bump the unit.

CAUTION: To reduce the risk of fire or injury, do not use
this product in conjunction with any variable (rheostat) wall
control.
NOTE: The remote control has already been paired
to the ceiling fan for your convenience.
FUNCTIONS OF TRANSMITTER
OFF: Turn off the ceiling fan.
HI: Turn on the fan at high speed.
MED: Turn on the fan at medium speed.
LOW: Turn on the fan at low speed.
LIGHT: ON/OFF- Press and release immediately to turn on or off the light.
DIMMER (If any)- Press and hold on to dimmer or brighten the light.
Installation of Transmitter Wall Mount
Holder with two screws.
11
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS