Installing Stainless Steel Handle - Avanti WCR5449SS Manuel D'instructions

 INSTALLING STAINLESS STEEL HANDLE
This wine chiller includes a stainless steel handle that is not required to operate this unit. To install
the handle please follow the below instructions:
1. Pull away the door gasket in the area where the handle is to be installed as shown below
in Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.
2. Align the handle with the screws pre-installed on the backside of the door. Tighten the
screws using a Phillips head screwdriver until the handle sets both flush and secured
tightly against the door frame. (DO NOT overtighten as this will cause damage to the
handle assembly).
3. Replace the door gasket to its original position.
1
a Gasket
② Screw ③ Screwdriver
9
④ S/S Handle
2