Operating Your Wine Chiller; Setting The Temperature Control - Avanti WCR5449SS Manuel D'instructions

It is recommended you install the Wine Chiller in a place where the ambient temperature is
between 72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65
degrees Fahrenheit may not be reached.
Recommended Temperatures for Chilling
Red Wines
Dry / White Wines
Rose Wines
Sparkling Wines
CONTROL PANEL
 ON/OFF POWER
To turn ON or OFF the appliance, press the ON/OFF button
The LED readout will show the original temperature set previously (the preset temperature at the
factory is 54ºF(12ºC).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature
display window.


SETTING THE TEMPERATURE CONTROL

You can press UP
•
Then press the UP
•
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN
button once.
The temperature range is 40 ~ 65ºF/ 5 ~ 18ºC which is suitable for storing sparkling, white and red
wines.
•
When you store mostly red wines, the temperature which you control needs to be set at
between 58 to 65°F/15ºC to 18ºC and the red LED lamp marked "RED" will be lit
•
When you store mostly white wines, the temperature can be set at between 48 to 57°F/9º to
14ºC and the green LED lamp marked "WHITE" will be lit.
•
When you store mostly sparkling wines, the temperature needs to be set at between 40 to
47°F/5 to 8ºC and the amber LED lamp marked "SPARKL" will be lit.

OPERATING YOUR WINE CHILLER

Wine.
59 - 65 ºF 15 - 18 ºC
50 - 55 ºF 10 - 13 ºC
49 - 51 ºF 9 – 11 ºC
40 - 47 ºF 5 - 8 ºC
or DOWN buttons to get the desired temperature in each zone.
or DOWN buttons to get the desired temperature in the top zone.
10
.
button