Installation And Electrical Connection; Before Installation - Sentiotec A-910 Mode D'emploi

2

Installation and electrical connection

Before installation:

• Carefully remove the light from the packaging.
• Before commissioning the light, ensure that it has not been damaged in transit. The light must not be operated
if electrical components are damaged. Repairs must only be performed by electrical specialists.
• Keep packaging material out of the reach of children and pets. Risk of suffocation!
Installation
• This product must only be installed by a qualified electrical specialist.
• Before installation the connection cables in the building must be switched off and safeguarded against switch-
on. To this end, trip the relevant automatic fuse in the domestic electrical installation.
• When operated outdoors it is recommended to safeguard the outdoor light with a residual current device.
• Ensure that the subsurface is suitable for weight bearing in a durable and reliable manner.
• Keep the lamp housing in the desired installation position and mark the boreholes.
• Use appropriate screws to secure the light.
• Ensure that no cables are damaged.
• Conduct the power supply leads through the aperture of the lamp housing. Ensure that the lead is cleanly and
tightly conducted through the seal.
• Now connect the connection cables of the domestic electrical installation to the screw terminals of the light.
First connect the green-yellow earth wire and then the two other wires. As a rule, the brown (or black) cable is
the live wire, connect this to the terminal marked with 'L'. The blue conductor must be connected to the termi-
nal marked with 'N'.
vom Steuergerät
from control unit
de l'unité de commande
dalla centralina
de besturingseenheid
från styrenheten
• Do not kink the cable; please ensure that the cable and plug are free from attractive and torsional forces.
Protect all cables and insulations from possible damage.
• Recheck proper connection.
• Install the bulb (see change of bulb).
• Switch the automatic fuses in the domestic electrical installation on again.
• The rating plate must not be removed.
World of Wellness
Instructions for installation and use – only for experts P. 4/8