Noritz N-132M Manuel D'installation page 13

Set temperature.
2
Always check the
(
temperature setting
before use.
Hot
Cold
Check the indicator lights.
Water temperature
(
The temperature settings below are examples. The temperature setting
°F :
necessary depends on the usage, the length of piping and the time of year.
100 105 110 115 120 125 130 135 140 145 150 160 170 180
Washing Shower, hot water
dishes, etc. supply, etc.
* For most residential applications, the recommended setting temperature is 120°F or less.
For applications that occasionally require a higher temperature setting, locate the remote controller
in a convenient location (
* Consult local codes for minimum operating temperatures.
3
Turn on hot
)
water.
On
High temperature
*Initial factory setting is 110°F
p.64).
4
)
If fixtures incorporate mixing
valves, set the temperature
higher than usual.
Turn off the hot
water.
Off
13