Disposal And Recycling - EINHELL GE-CM 18/30 Li Mode D'emploi

Transport
•
Switch the machine off and isolate it from the
power supply before transporting it.
•
Fit the shipping protectors, if any.
•
For easier transport and/or storage, open the
wing nuts (Fig. 3b / Item 13) far enough to al-
low the push bars to be flipped together at this
point. Take care not to damage the cable and
the push bar tubes.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and tip-
ping over.

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should be
taken to a suitable collection center for proper dis-
posal. If you do not know the whereabouts of such
a collection point, you should ask in your local
council offi ces.
Anl_GE_CM_18_30_Li_Solo_SPK9.indb 25 Anl_GE_CM_18_30_Li_Solo_SPK9.indb 25
GB
- 25 -
09.02.2021 13:03:56 09.02.2021 13:03:56