Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
9
Release the decorative panel to connect the power cord of the hood to the
power supply. Make sure that the electrical wiring is well packed with electrical
tape to prevent electrical shock (see figure 7).
10
Mount the decorative plate and adjust the adjusting screws. Hold the hood
horizontally and slowly lower it so that the force is equally distributed over all 4
cables. Attach the power cord along the wire rope with the cable tie (see figure
8). The installation is now complete.
22
Publicité
Chapitres
Table des Matières
