Environment Protection; Control Panel - Atag KF8178CDL/A01 Notice D'utilisation

Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.

Environment Protection

This appliance does not contain gasses
which could damage the ozone layer,

CONTROL PANEL

ON/OFF button
1
Display
2
Temperature warmer button
3
Temperature colder button
4
OK button
5
Display
Timer function
1
Drinks Chill function
2
Fast Freeze function
3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
1 2
Functions
6 5
6
It is possible to change predefined sound of
buttons to a louder one by pressing togeth-
er the Functions button and Temperature
colder button for some seconds. Change is
reversible.
1 2 3
2. Press the ON/OFF button if the display
3. The alarm buzzer may sound after a
4. The temperature indicators show the
To select a different set temperature refer to
"Temperature regulation".
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol are recyclable.
4 3
Functions button
4 5 6
is off.
few seconds.
To reset the alarm refer to "Door open
alarm".
If "DEMO" appears on the Display, the
appliance is in demonstration mode: re-
fer to "Troubleshooting" paragraph.
set default temperature.
17