Explosion Hazard; Power Module Electrical Connections - AGA marvel M18SZ Instructions D'installation, D'utilisation Et D'entretien

Rear
shoulder
screw-
Front
shoulder
screw-
Figure 11
WARNING
!
TIPPING HAZARD
When installed the power module is not fas-
tened to the cabinet. It must be removed
when the cabinet is tipped or transported.
WARNING
!
EXCESSIVE WEIGHT HAZARD
Use two or more people to move product.
Failure to do so can result in back or other injury.
WARNING
!

EXPLOSION HAZARD

Do not operate the wine cellar in the presence
of explosive chemicals or fumes.
INSTALLING THE POWER MODULE
13

Power module electrical connections:

Make electrical connections from the top of the lower
cabinet to the junction box at left side of module. See
module diagram Figure 12.
Run the power cord in front of power module on top of
cabinet around the right side of power module to the
electrical outlet. See Figure 12.
Plug in the (6) electrical connectors for the lights coming
from the cabinet into the (2) power supplies which are
attached to the power module, see Figure 13.
Power module on
top of cabinet-
-Junction box
-Cabinet leads
Figure 12
-Light power supplies mounted
Light
harnesses
from
cabinet-
-Power
cord
in power module
Figure 13